The architecture of an intelligent system of energy production and consumption, which is based on the integrated dynamic subsystem, including co-generation unit, electric battery and thermo-electric battery was proposed.Using the resulting information, obtained based on monitoring the operability and identifying the status of electric battery and thermo-electric battery, a method for integrated decision-making in conditions of mismatch of energy production and consumption was developed. Share with us which method you prefer for the same in the comments section below.The necessity of maintaining the ratio of production and consumption of electric energy and heat for the resource- and energy saving was substantiated. We hope with time and practice, you have the unit conversions at the tip of your fingers, lessening your dependency on electronic media.ĭo try out the drawing conversion tricks and let us know what suits you best. You will see the factor of conversion as 25.4 (As seen above 1” - 25.4mm) to convert drawing from inches to millimeters
Uncheck Specify On-screen radio button from insertion point, Scale and Rotation panels, also make sure the explode radio button is checked in the lower left corner of the Insert window. Type command “Insert” and attach the file (Sample1) that needs to be converted Save the drawing that needs to be converted (eg. You can check by measuring different sides. You may see a blank screen after this, just enter the Zoom Extents command and you will have your drawing.
Your drawing is now converted into Millimetres. Scale objects in current drawing to reflect change in units? Scale objects from other drawings upon insert? Similarly from the next prompts select these options: Let’s take an example that we need to convert our drawing in inches to millimeters. Here is a list of basic conversions necessary to learn, to convert a unit into the required unit rapidly!Īll students and young professionals often break a sweat when an AutoCad drawing in metric units needs to be converted into imperial units and vice-versa! Fret not, these conversion tricks will fulfill the job for you in seconds. The units primarily used in any type of architectural drawings are Imperial units (feet - inches) and Metric units (metre - centimetre - millimeter). When discussing drawings with the client or on-site workers, it becomes necessary to be able to switch between units promptly, without the use of any electronic media.
Our mind is accustomed to the use of calculators for simple unit conversions like feet-metre, metre-inch and so on. Sometimes tackling the units of these measurements becomes a challenging task.
As architects and designers, measurement is the most basic and essential tool for us.
0 kommentar(er)
